- Reduced price
Reference: ABLC200V
Brand: ABLOY
MORTISE LOCK ABLOY LC200 LEFT Lock case with a deadbolt protruding 20 mm and a latchbolt.The deadbolt is locked and retracted by turning the key or thumbturn 90°.A further 5° turn will retract the latchbolt as well.The latchbolt is retracted also by the lever handles.
MORTISE LOCK ABLOY LC195 RIGHT
Lock case with an automatically deadlocking latchbolt.
The latchbolt is deadlocked when retained inside the lock case. Deadlocking is controlled by a snib in the front plate.
The lock cases fitted with at feature to prevent unauthorized use of te snib. The snib is opened by turning first the key or thumbturn. The lock has no lever handle operation.
Snib position:
UP = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or a thumbturn.
DOWN = Latchbolt is retained inside the lock case.
LC195X is the microswitch version of the lock. The switch changes it´s status when the bolt protrudes 21 mm. Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693.
Striker plate: 4690, 4691, LP711, LP714, LP721, LP731
Finish: Fe/ZL
Reference: ABLC102P
Brand: ABLOY
MORTISE LOCK ABLOY LC102 RIGHT Lockcase with automatic deadlocking latchbolt.The lock must always be equipped with handles, as the latchbolt is retracted with the handles only.The deadlocking is controlled by a small lever in the forend. When in "DEADLOCK" mode, the door is opened by turning the outside key 180° or the inside special thumbturn 90°. The...
Reference: ABLC190V
Brand: ABLOY
LOCK CASE ABLOY LC190 LEFT A cylinder lock case with an automatically deadlocking latchbolt Finish: Fe/ZL The deadlocking is controlled with a snib in the forend: UP – deadlocking, latch protrudes 21mm. The lock can be opened only with a key or a thumbturn; DOWN – latchpolt protrudes 14mm. The lock can also be opened with the lever handles. The snib can...
Reference: ABLE186P
Brand: ABLOY
EXIT LOCK CASE ABLOY LE186 RIGHT Finish: Fe/ZL Handing: right Exit lock case with automatic deadlocking latchbolt for the active side of wooden doors with two blades The door is opened from outside with a door pull The lock is always opened from the inside by a lever handle, push pad or panic bar The latchbolt protrudes 14 mm Deadlocking is controlled by...
Reference: ABLC190P
Brand: ABLOY
MORTISE LOCK ABLOY LC190 RIGHT Lock case with an automatically deadlocking latchbolt.The deadlocking is controlled by a snib in the forend.Snib position:UP = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or a thumbturn.DOWN = Latchbolt protrudes 14 mm. The lock can also be opened with the lever handles.Suitable for use...
Reference: ABLC197P
Brand: ABLOY
MORTISE LOCK ABLOY LC197 RIGHT Cylinder lock case with a cylinder function for fire doors.The lock is opened by a key or a thumbturn. The non-deadlocking latchbolt protrudes 14 mm.The lock can also be used with electromechanical striker plates.Striker plate: 4690, 4691, LP711, LP714, LP721, LP731Finish: Fe/ZLFire resistance:Wooden doors EI115 - EI1 30 and...
Reference: ABLC193V
Brand: ABLOY
MORTISE LOCK ABLOY LC193 LEFT Cylinder lock case for emergency exits.The latchbolt deadlocks automatically when the door is closed,protruding 21 mm.The lock case is suitable for use with a double cylinder andan emergency exit thumbturn.The bolt is opened with either the key or the emergencythumbturn.
Reference: ABEL482-35
Brand: ABLOY
SOLENOID LOCK ABLOY EL482-35 EL482 is a handle controlled solenoid lock used in narrow profile doors. Features Voltage: 12-24 VDC Backset: 35mm Operating temperature range: -20ºC kuni +60ºC Faceplate: 25 mm Application: Interior doors of e.g. business premises Fire rated doors Not suitable for use with door automatics Both outside and inside handle...
Reference: ABLC100V
Brand: ABLOY
LOCK CASE ABLOY LC100 LEFT Lock case with an automatically deadlocking latchbolt. The lock must always be equipped with handles, as the latchbolt is retracted with the handles only. The deadlocking is controlled by a snib in the forend. Features Finish: FE/ZL Handing: left Suitable cylinders: ABLOY CY001, CY002, CY013, CY028, CY040 Striker plates:...
Reference: ABLC194P
Brand: ABLOY
MORTISE LOCK ABLOY LC194 RIGHT Lock case with an automatically deadlocking latchbolt.The latchbolt is deadlocked when retained inside the lock case.The latchbolt protrudes to 21 mm when the door is closed.The lock has no lever handle operation.The bolt is opened with either a key or a thumbturn.
Reference: AB4194V
Brand: ABLOY
MORTISE LOCK ABLOY 4194 LEFT Cylinder lock case with an automatically deadlocking latchbolt.The latchbolt protrudes to 21mm when the door is closed.The lock has no lever handle operation.The bolt is opened with either a key or a thumbturn.
Reference: ABEL402
Brand: ABLOY
SOLENOID LOCK ABLOY EL402 EL402 is a handle controlled solenoid lock used in narrow profile doors. Handle controlled locks are best suited in medium traffic doors. The locks can be electrically controlled by access control system or by a remote control system such as timer, keypad or push button. Features Finish: chrome Voltage: 12-24 VDC Backset:...
Reference: ABLE180P
Brand: ABLOY
MORTISE LOCK ABLOY EXIT LE180 FOR FLUSH DOORS RIGHT Exit lock cases with automatic deadlocking latchbolt forwooden doors with one blade.The lock case fulfils the requirements of the Europeanstandard for exit products SFS-EN179 and SFS-EN1125and the requirements of the lock case standardSFS-EN12209.The door is opened from outside with a lever handle.The...
Reference: AB4194P
Brand: ABLOY
MORTISE LOCK ABLOY 4194 RIGHT Cylinder lock case with an automatically deadlocking latchbolt.The latchbolt protrudes to 21mm when the door is closed.The lock has no lever handle operation.The bolt is opened with either a key or a thumbturn.
Reference: ABLC200P
Brand: ABLOY
MORTISE LOCK ABLOY LC200 RIGHT Lock case with a deadbolt protruding 20 mm and a latchbolt.The deadbolt is locked and retracted by turning the key or thumbturn 90°.A further 5° turn will retract the latchbolt as well.The latchbolt is retracted also by the lever handles.
Reference: ABCY060T
Brand: ABLOY
Cylinder ABLOY CY060 PROTEC2 CR Cylinder mechanism: ABLOY® PROTEC. Single outside cylinder complete with fittings, cylinder ring of steel. EN1303: grade 2. Finish: bright chrome. 3 keys included.
Reference: ABCY322T
Brand: ABLOY
EURO PROFILE CYLINDER ABLOY CY322T PROTEC2 Basic length 31/31 mm. This product has ABLOY PROTEC² -lock system. ABLOY PROTEC² is a factory level locking solution. Every key is carefully controlled and is only made at Abloy Oy's factory. The keys have a patented sliding element that increases key security. One key fits several locks. How many locks a single...
Reference: ABLC102P
Brand: ABLOY
MORTISE LOCK ABLOY LC102 RIGHT Lockcase with automatic deadlocking latchbolt.The lock must always be equipped with handles, as the latchbolt is retracted with the handles only.The deadlocking is controlled by a small lever in the forend. When in "DEADLOCK" mode, the door is opened by turning the outside key 180° or the inside special thumbturn 90°. The...
Reference: ABCY063NI
Brand: ABLOY
Cylinder ABLOY CY063 CLASSIK NICKEL Cylinder mechanism: ABLOY® CLASSIC. Single outside cylinder complete with fittings for narrow profile doors. Cylinder ring of steel. EN1303:2005: grade 2. 3 keys included.
Reference: ABCY205TMCR
Brand: ABLOY
CYLINDER ABLOY CY205T PROTEC2 MCR High durability cylinder rings against pulling, twisting and sawing. This product has ABLOY PROTEC² -lock system. ABLOY PROTEC² is a factory level locking solution. Every key is carefully controlled and is only made at Abloy Oy's factory. The keys have a patented sliding element that increases key security. One key fits...
MORTISE LOCK ABLOY LC195 RIGHT
Lock case with an automatically deadlocking latchbolt.
The latchbolt is deadlocked when retained inside the lock case. Deadlocking is controlled by a snib in the front plate.
The lock cases fitted with at feature to prevent unauthorized use of te snib. The snib is opened by turning first the key or thumbturn. The lock has no lever handle operation.
Snib position:
UP = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or a thumbturn.
DOWN = Latchbolt is retained inside the lock case.