- -20%
MORTISE LOCK ABLOY EXIT LE180 FOR FLUSH DOORS RIGHT
Exit lock cases with automatic deadlocking latchbolt for
wooden doors with one blade.
The lock case fulfils the requirements of the European
standard for exit products SFS-EN179 and SFS-EN1125
and the requirements of the lock case standard
SFS-EN12209.
The door is opened from outside with a lever handle.
The lock is always opened from the inside by a lever
handle, push pad or panic bar.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked. The snib is released
by turning the key.
Snib position:
UP = Deadlocking, latchbolt protrudes 17 mm.
The lock can be opened from outside by key only and
from inside by a lever handle, push pad or panic bar.
DOWN = Latchbolt protrudes 14 mm. The lock can be
opened from outside by lever handle also.
LE180X is the microswitch version of the lock. The
switch changes the status when latchbolt is protruded
from 14 mm to 17 mm.
Following striker plates are recommended to be used
with microswitch version: 4692, 4693.
Striker plate: LP711, LP714, LP721, LP731
Finish: Fe/ZL.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
MORTISE LOCK ABLOY EXIT LE180 FOR FLUSH DOORS RIGHT
Exit lock cases with automatic deadlocking latchbolt for
wooden doors with one blade.
The lock case fulfils the requirements of the European
standard for exit products SFS-EN179 and SFS-EN1125
and the requirements of the lock case standard
SFS-EN12209.
The door is opened from outside with a lever handle.
The lock is always opened from the inside by a lever
handle, push pad or panic bar.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked. The snib is released
by turning the key.
check_circle
check_circle