

MORTISE LOCK ABLOY EXIT LE180 FOR FLUSH DOORS LEFT
Exit lock cases with automatic deadlocking latchbolt for
wooden doors with one blade.
The lock case fulfils the requirements of the European
standard for exit products SFS-EN179 and SFS-EN1125
and the requirements of the lock case standard
SFS-EN12209.
The door is opened from outside with a lever handle.
The lock is always opened from the inside by a lever
handle, push pad or panic bar.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked. The snib is released
by turning the key.
Snib position:
UP = Deadlocking, latchbolt protrudes 17 mm.
The lock can be opened from outside by key only and
from inside by a lever handle, push pad or panic bar.
DOWN = Latchbolt protrudes 14 mm. The lock can be
opened from outside by lever handle also.
LE180X is the microswitch version of the lock. The
switch changes the status when latchbolt is protruded
from 14 mm to 17 mm.
Following striker plates are recommended to be used
with microswitch version: 4692, 4693.
Striker plate: LP711, LP714, LP721, LP731
Finish: Fe/ZL.
Reference: AB4197P
Brand: ABLOY
MORTISE LOCK ABLOY 4197 RIGHT Cylinder lock case with cylinder function for fire doors.The lock is opened by key or thumbturn.Suitable for use with ABLOY CY001, CY013 cylinders.Finishing: chrome.The 4197 comes complete with the 4690 (for flush doors) or 4691 (for rebated doors) striker plate.
Reference: ABLC204P
Brand: ABLOY
MORTISE LOCK ABLOY LC204 RIGHT Lockcase with automatic deadlocking latchbolt.For latching function bolt is retained by depressing it into the lockcase and sliding the button on forend down.Function is determined by sliding button on the forend:UP-position = automatic deadlocking. Operates by key (or thumbturn) from either side.DOWN-position = lock is...
Reference: ABEL402
Brand: ABLOY
SOLENOID LOCK ABLOY EL402 EL402 is a handle controlled solenoid lock used in narrow profile doors. Handle controlled locks are best suited in medium traffic doors. The locks can be electrically controlled by access control system or by a remote control system such as timer, keypad or push button. Features Finish: chrome Voltage: 12-24 VDC Backset:...
Reference: ABLC204V
Brand: ABLOY
MORTISE LOCK ABLOY LC204 LEFT Lockcase with automatic deadlocking latchbolt.For latching function bolt is retained by depressing it into the lockcase and sliding the button on forend down.Function is determined by sliding button on the forend:UP-position = automatic deadlocking. Operates by key (or thumbturn) from either side.DOWN-position = lock is...
Reference: ABEL482-35
Brand: ABLOY
SOLENOID LOCK ABLOY EL482-35 EL482 is a handle controlled solenoid lock used in narrow profile doors. Features Voltage: 12-24 VDC Backset: 35mm Operating temperature range: -20ºC kuni +60ºC Faceplate: 25 mm Application: Interior doors of e.g. business premises Fire rated doors Not suitable for use with door automatics Both outside and inside handle...
Reference: ABLC4292
Brand: ABLOY
EURO MORTISE LOCK ABLOY LC4292/0029 72/55mm
Reference: AB4190V
Brand: ABLOY
MORTISE LOCK ABLOY 4190 LEFT Lock case with an automatically deadlocking latchbolt.The deadlocking is controlled by a snib in the forend.Snib position:UP = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or a thumbturn.DOWN = Latchbolt protrudes 14 mm. The lock can also be opened with the lever handles.Suitable for use with...
Reference: ABLC200V
Brand: ABLOY
MORTISE LOCK ABLOY LC200 LEFT Lock case with a deadbolt protruding 20 mm and a latchbolt.The deadbolt is locked and retracted by turning the key or thumbturn 90°.A further 5° turn will retract the latchbolt as well.The latchbolt is retracted also by the lever handles.
Reference: ABLE186P
Brand: ABLOY
EXIT LOCK CASE ABLOY LE186 RIGHT Finish: Fe/ZL Handing: right Exit lock case with automatic deadlocking latchbolt for the active side of wooden doors with two blades The door is opened from outside with a door pull The lock is always opened from the inside by a lever handle, push pad or panic bar The latchbolt protrudes 14 mm Deadlocking is controlled by...
Reference: ABLC194V
Brand: ABLOY
MORTISE LOCK ABLOY LC194 LEFT Lock case with an automatically deadlocking latchbolt.The latchbolt is deadlocked when retained inside the lock case.The latchbolt protrudes to 21 mm when the door is closed.The lock has no lever handle operation.The bolt is opened with either a key or a thumbturn.
Reference: AB4197V
Brand: ABLOY
MORTISE LOCK ABLOY 4197 LEFT Cylinder lock case with cylinder function for fire doors.The lock is opened by key or thumbturn.Suitable for use with ABLOY CY001, CY013 cylinders.Finishing: chrome.The 4197 comes complete with the 4690 (for flush doors) or 4691 (for rebated doors) striker plate.
Reference: ABLC195V
Brand: ABLOY
MORTISE LOCK ABLOY LC195 LEFT Lock case with an automatically deadlocking latchbolt.The latchbolt is deadlocked when retained inside the lock case. Deadlocking is controlled by a snib in the front plate.The lock cases fitted with at feature to prevent unauthorized use of te snib. The snib is opened by turning first the key or thumbturn. The lock has no...
Reference: ABLC211
Brand: ABLOY
MORTISE LOCK ABLOY LC211 Security mortise lock case (comparable with securitygrade 5 according to EN 12209) with hardened deadboltand drilling protection.The deadbolt has a 20 mm bolt throw. The deadbolt islocked and retracted by turning the key or thumbturn 360°.The key can only be removed when the deadbolt is fullylocked or retracted.LC211X is the...
Reference: ABLC195P
Brand: ABLOY
MORTISE LOCK ABLOY LC195 RIGHT Lock case with an automatically deadlocking latchbolt.The latchbolt is deadlocked when retained inside the lock case. Deadlocking is controlled by a snib in the front plate.The lock cases fitted with at feature to prevent unauthorized use of te snib. The snib is opened by turning first the key or thumbturn. The lock has no...
Reference: ABCY205TMCR
Brand: ABLOY
CYLINDER ABLOY CY205T PROTEC2 MCR High durability cylinder rings against pulling, twisting and sawing. This product has ABLOY PROTEC² -lock system. ABLOY PROTEC² is a factory level locking solution. Every key is carefully controlled and is only made at Abloy Oy's factory. The keys have a patented sliding element that increases key security. One key fits...
MORTISE LOCK ABLOY EXIT LE180 FOR FLUSH DOORS LEFT
Exit lock cases with automatic deadlocking latchbolt for
wooden doors with one blade.
The lock case fulfils the requirements of the European
standard for exit products SFS-EN179 and SFS-EN1125
and the requirements of the lock case standard
SFS-EN12209.
The door is opened from outside with a lever handle.
The lock is always opened from the inside by a lever
handle, push pad or panic bar.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked. The snib is released
by turning the key.